RSS

Install the VirtualBox’ Guest Additions in Windows 8 Consumer Preview, and avoid the black screen

29 Mar

I had no problem to install the Windows 8 Consumer Preview under VirtualBox 4.1.10 until I tried to install the Guest Additions of VirtualBox. Unfortunately I needed them to share files.
The problem lies in the video adapter driver: during the installation of the Additions, and after a system reboot, a horrible black screen appears.

The solution

With this solution, the Additions work, except the video driver (we have to disable it).
But you can share files, at least.

First step: Activate the safe boot menu entry

As many know, Windows 8 doesn’t show this menu entry by default, even with F8. Fortunately, there is a procedure to activate it.
The safe boot mode is compulsary here, so before reading the following procedure, please follow the instructions on that site:
http://www.addictivetips.com/windows-tips/how-to-enable-windows-8-safe-mode/

Second step: Install the Additions

(I’ve done the procedure on a French installation, so I had to translate the texts here, they can be slightly different on an Engligh installation)

  1. Ensure the configuration of your virtual computer uses the 3D acceleration and uses 128 MB video RAM.
    I’m not sure these two settings are necessary, but the procedure works with them.

  2. Run your virtual computer and Windows 8 in normal (not safe) mode, then open an administrator session.

  3. Start the installation of the Guest Additions of VirtualBox.
    You can notice the installation of the experimental Direct3D driver cannot be unchecked.

  4. When Windows asks you, for the first time, if you want to install an Oracle driver, tickAlway trust the drivers from Oracle” (or something similar to that text).

  5. The installation goes on until the screen goes black.
    From here, wait a few minutes (maybe two) to let the installer enough time to conclude its job, because it is not frozen, even if we cannot see it working.

Third step: disable the VirtualBox’ video driver

  1. Now reboot the virtual computer by force.

  2. Start Windows 8 in safe boot mode.
    The first time, Windows reboot one more time, it’s ok.

  3. In safe mode, open an administrator session.

  4. Open the hardware settings panel:
    Windows+R and the name
    DEVMGMT.MSC

  5. In the Video adapter section, right-click on this video driver: “VirtualBox Graphics Adapter (Microsoft Corporation – WDDM)“,
    and click on Update driver.

  6. On the next panel, select Find a driver on my computer.

  7. On the next panel, select Find in a list of peripheral drivers on my computer.
    The description says those drivers are compatible with our hardware.

  8. A list with two drivers appears,
    the normal driver “Microsoft Basic video adapter”,
    and the driver “VirtualBox Graphics Adapter (Microsoft Corporation – WDDM)“.
    Select the first driver (the basic driver) and validate.

  9. Reboot Windows 8 in normal mode.
    It should start normally, as it was before the installation of the Additions.

But now you enjoy the Additions (except in the video field), notably the file sharing.

I hope it will work for you as fine as it did for me.   🙂

Sorry for my poor English-talking.  😉
I thought this doc could be useful.

Advertisements
 
6 Comments

Posted by on 2012-03-29 in Tips

 

Tags: , , , ,

6 responses to “Install the VirtualBox’ Guest Additions in Windows 8 Consumer Preview, and avoid the black screen

  1. furu

    2012-04-02 at 11:26 am

    If you are using Windows7 as host and have Intel HD Graphics, then you have to upgrade your host graphic driver version. You can use driver that version is 8.15.10.2656 from Intel site.
    I have succeed using version of 8.15.10.2653 from Microsoft update catalogue and 8.15.10.2656 from Intel site.
    Using drivers version of under 8.15.10.2653,you are going to have black screen after installing of guest additions.For example , 8.15.10.2622 or 8.15.10.2509 , 8.15.10.2418 you will fail .
    Good luck!!

     
    • chrisbertrandprog

      2012-04-02 at 3:45 pm

      Thanks for the information. 🙂

      Nice if that works with Intel.

      I keep this article here because it is a very common problem with VB and Win 8.

       
  2. Aleshka Titov

    2012-08-22 at 11:21 am

    Worked like a charm!
    Thank you!

     
  3. Kenji

    2012-08-24 at 6:36 am

    Thank you. It helped. I didn’t need to do it in Safe Mode because the black screen problem doesn’t exist in the latest version of Guest Additions or Windows8. It was still useful to do ‘Microsoft Basic video adapter’.

     
  4. Barry Staes (@BarryStaes)

    2012-11-06 at 3:28 pm

    For me it was solved (after being stuck with the black screen in Windows8ConsumerPreview after installing the guest addons) by enabling 3D acceleration in VirtualBox with 128MB. But as said, the problem is no longer when using a recent VirtualBox and Windows 8 release.

     
  5. Wibur

    2014-03-06 at 10:44 pm

    i love this, worked like a charm, had issues of starting up my VM’s remotely via RDP or TeamViewer, when I updated the Driver to a Microsoft Driver, I was able to do it remotely

     

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s